WaterPik 1.5 GPM EcoFlow 3 Mode Showerhead Chrome VBE-423

Mfg #:
Our Item #:
Minimum Purchase:
4 units


“Take invigorating, refreshing, or relaxing shower with increased water forced while using less water.”

  • Advanced OptiFLOW Technology that increases water force while using less water to make you feel refreshed and invigorated
  • Saves you up to 40% or $109 in energy and water bills per year*
  • Pays for itself in 6 months*
  • 3 spray modes: pulsating massage, concentrated powerspray, and combo spray
  • Toggles Switch for water pause control
  • Adjustable head and easy clean nozzles
  • Installs in minutes on any standard shower arm without pipe tape
  • Lifetime Warranty

How It Works

The WaterPik EcoFlow 1.5 gpm 3-mode, wall mounted showerhead is in WaterPik Ecoflow series of advanced OptiFLOW showerheads. In a nutshell, this chrome, non-aerated showerhead delivers a high quality shower experience through an efficient use of water:
  • OptiFLOW technology channels water through the shower head to deliver up to 30% more water force with the same water pressure.
  • Water Pause Toggle Switch helps you reduce water flow to a trickle for an additional water savings while you shave, shampoo or lather for an average annual savings of $109*.
  • 3.25” shower head offers a stylish design with 3 full body spray coverage settings to fit your every need: pulsating massage, concentrated center powerspray, powerspray-pulsating massage.
  • Non-aerating means air is not mixed into the water stream, as it passes through the showerhead; as a result, less temperature is lost between the showerhead and you.

Package Content
  • 3-Mode Fixed Mount Showerhead
  • Installation & User Guides
  • Lifetime Warranty

* Average shower lasts 10 minutes. Average number of showers per day, per household is four. Source: U.S. Dept of Energy (Jan 2007).
Make & Model
  • Manufacturer: WaterPik EcoFlow
  • Model: VBE-423
  • Color: Chrome
  • Material: Standard 1/2-inch threads
  • Dimension: 3.25 inches (head diameter)
  • Weight: 1 pound
  • Type: Non-aerated, Fixed Mount
  • Max Flow (Pressure): 1.5 gpm (80 psi) = low flow
  • Variable Sprays: Yes, 3 (Pulsating massage, concentrated powerspray, and combination of the two)
  • Off Valve: Yes
  • Case Quantity: 2
  • Certification: Meets ANSI standards

How to Install

Optional: small towel/rag and pliers/wrench
  • Twist off the existing showerhead; if you need pliers, first put a small towel over the showerhead for better grip and protection.
  • Remove large nut from your new showerhead.
  • Place large nut over shower pipe (narrow end toward wall), then thread pivot ball onto shower pipe and hand tighten clockwise to a snug fit.
  • Use pliers provided to tighten pivot ball to pipe until it is secure.
  • Attach showerhead by hand tightening the large nut to the threaded collar of the showerhead. (NOTE: This nut and collar have a left handed thread; the large nut tightens when turned clockwise as viewed from the face of the shower head.)
  • Turn the water on and check for leaks; if leaking occurs, re-tighten large nut as described above.
  • Check again for leaks, and repeat above step as necessary.
  • To test the Toggle Switch, turn the finger-tip control to the single drop diagram for the pause feature.

  • Lifetime Warranty