Description
Product Description
The WT88xx Water Heater Control is designed for use in Standing Pilot applications using an immersion well for water temperature sensing. All models of WT88xx controls include an integrated NTC temperature sensor. The WT88xx controls are powered from a thermopile heated by the standing pilot flame. CS88xx pilot assemblies are designed for use with this control. The immersion well for sensing water temperature has matched NTC thermistor sensors. These sensors provide the fail-safe mechanism through which the WT88xx controls can provide both accurate water temperature control as well as water temperature limit (Temperature Cut-Out [TCO]) function.
Specifications
- For 1" insulation tank, 4" WC setting
- IMPORTANT: WT88xx controls provide direct replacement only.
- Pressure Regulator: The outlet pressure regulator setting is shown on the product label.
- Inlet Pressure Range: See appliance rating plate for inlet pressure range recommendation. 0.5 PSI (14.0 in. w.c.) maximum inlet pressure allowed for proper operation.
- Body Pattern: 90 degrees with 1/2 in. inlet and 1/2 in. inverted flare outlet.
