Description
Product Description
Make sure your bathroom fan operations meet ASHRAE 62.2 ventilation standards with the Digital Bath Fan Control. The control replaces a normal bathroom switch to provide simple programming. This allows you to manually turn the exhaust fan off and on or to program it to run at certain times of the day for increased energy efficiency and convenience. The programmable fan timer will run in timer mode up to 60 minutes in 5-minute increments. It also comes with an easy-to-see backlit display that shows the current time to keep you on schedule while getting ready for the day.
-
Simple Programming
The Digital Bath Fan Control comes with three simple buttons and four modes for easy programming and operation. Turn the exhaust fan on and off manually with the main button, or program the fan to run at certain times of the day for energy efficiency.
-
Meet Ventilation Standards
When in ventilation mode, the controller turns the fan on or off to meet ASHRAE 62.2 Ventilation Standard based on total floor space, number of bedrooms and fan capacity. This standard is required or recommended in most states for new construction or whenever a permit is required.
-
Convenient Display
The easy-to-see, backlit display makes using the smart bathroom fan switch convenient and straightforward. Quickly check the time while you get ready or change the programming mode in seconds. You have the choice between three backlight modes - high, low or off.
Product Specifications
- HVC0001: white
- HVC0002: biscuit
- Voltage: 120 VAC - 15%, + 10%
- Frequency: 60 Hz ± 5%
- Minimum Load: 0.17 A (20 W)
- Maximum Load: 2.5 A (300 W)
- Minimum Power Factor: 0.60
- Operating Temperature Range: -15°C to 50°C (5°F to 122°F)
- Storage Temperature Range: -40°C to 60°C (-40°F to 140°F)