Fantech Products
Conservation Mart is proud to carry Fantech products. We offer Fantech ventilation and exhaust items including backdraft dampers, ducts, HEPA filters, vents and accessories. Fantech is dedicated to providing state of the art ventilation solutions to the market. Fantech is a leading manufacturer of backdraft dampers, ducts, HEPA filters, vents and accessories. When looking for Fantech ventilation and exhaust products, Conservation Mart is your choice for a wide selection and low prices.
Displaying: 1 - 12 of 18
Page:1
2 
 |
| Fantech HEPA Replacement Filter RHF16 |
|
These filters are for use with Fantech CM3000 series Whole House Air Cleaners. The HEPA filter is available seperarely, and needs to be replaced every 2 to 5 years, depending on proper maintenance of the pre-filters and the level of pollutants in the home.
|
|
Your Price: $96.99
|
|
|
|
|
 |
| Fantech Steel Roof Caps |
|
This Fantech roof cap is made of galvanized steel, has a damper flap closure, duct connection and a screened exhaust opening. The 3 inch long duct connections are 1/8 inch smaller than the corresponding duct size.
|
|
Your Price: $79.50
|
|
|
|
|
 |
| Fantech Backdraft Damper |
|
Backdraft dampers prevent the unwanted flow of air into a house through exhaust ducts when the exhaust fan is off. These sensitive spring-loaded backdraft dampers will accomplish this while providing a good seal against backdrafts
|
|
Your Price: $15.40
|
|
|
|
|
 |
| Fantech Mounting Collar |
|
The grill can simply be inserted into the end of an appropriately sized rigid duct, or used with flex duct with this mounting collar.
|
|
Your Price: $5.15
|
|
|
|
|
 |
| Fantech 4 inch Round to Oval Duct Elbow FEL 4 |
|
This is a plastic 90 degree mounting collar/elbow for use in a 2 x 4 stud wall. The unique low depth profile makes this elbow the perfect solution for sidewall ventilation within a wall partition.
|
|
Your Price: $6.45
|
|
|
|
|
|
|
|
 |
| Fantech 100 cfm Single Grill Bath Exhaust Fan/Light PB100F |
|
This fan consists of two components. The small grill housing with an integrated 14 watt compact fluorescent light that is installed at the ceiling, and the fan that is installed in a remote location well away from the bathroom.
|
|
Your Price: $252.00
|
|
|
|
|
|
|
|
 |
| Fantech 230 cfm Dual Grill Bath Exhaust Fan PB230-2 |
|
This fan consists of four components. Two small grill housings that are installed at the ceiling, one fan that is installed in a remote location well away from the bathroom, and a "Y" adapter to allow both exhaust grills to share the one fan.
|
|
Your Price: $246.00
|
|
|
|
|
 |
| Fantech 230 cfm Dual Grill Bath Exhaust Fan/Light PB230F-2 |
|
This fan consists of four components. Two small grill housings with integrated 14 watt compact fluorescent lights that are installed at the ceiling, one fan that is installed in a remote location well away from the bathroom, and a "Y" adapter to allow both exhaust grills to share the one fan.
|
|
Your Price: $377.50
|
|
|
|
|
 |
| Fantech Duct Increaser/Reducer |
|
These increasers/reducers allow round ductwork to be increased from 4 to 6 inches or from 6 to 8 inches, or decreased, which is sometimes necessary when you are exhausting from two locations with one in-line fan.
|
|
Your Price: $6.50
|
|
|
|
|
 |
| Fantech Exhaust Hood FML |
|
These are metal prepainted white aluminum hood for 8, or 10 inch duct. They are suitable for outdoor exhaust applications.
|
|
Your Price: $43.30
|
|
|
|
|
Page:1
2
OSI GreenSeries LEED Compliant, Low VOC Sealant
Your Price: $4.50
