Spray Foam Machine Startup Package: Touch n Seal Series 2 CPDS Machine + 750 Board Foot Kit for CPDS

Touch n Seal
Mfg #:
75650 00150, 75650 02750
Our Item #:
  •  Touch n Seal Foam CP-750 Board Feet Kit for CPDS Spray Foam Machine
  •  Touch n Seal Series 2 CPDS Spray Foam Machine


This package is all you need to start your own spray foam business! Or expand your existing lines of business into spray foam applications.

Touch n Seal CPDS Spray Foam Machine + 750 Board Foot Kit for CPDS

This Kit contains:

  • Touch n Seal Series 2 CPDS Spray Foam Machine It comes ready to use. All that is needed are the "A" and "B" polyurethane foam tanks. Included with the CPDS Series 2 are the tools necessary for application: a 30' chemical delivery hose set, 50 disposable spray nozzles, 2 foam applicators, an operational DVD, and a set of manuals for operation and manuals. Chemical foam cylinders are available for both 1.75 pcf and 1.00 pcf Class 1, Fire Retardant polyurethane spray foam.
  • Touch n Seal Foam CP-750 Board Feet Kit for CPDS Spray Foam Machine.This Initial Fill and Refill kit is designed for the Touch n Seal Series 2 CPDS Spray Foam Machine.

The CPDS Series 2 Machine from Touch 'N Seal combines convenience with efficiency by applying spray foam up to 2 and a half times faster than standard foam kits. It is a portable, constant pressure dispensing machine used to install Class I fire-retardant polyurethane foam. The foam is both insulating and sound attenuating. With a minimal investment, the CPDS Series 2 Machine provides a great opportunity for services looking to expand as well as start-up insulation businesses. Use of the machine is also positive for the environment, as the foam is dispensed from the bottom of the tank, leading to less chemical waste. Similar to the standard foam kits, the foam tanks used with the machine are disposable.

CPDS Series 2 Properties

  • Weight (empty): 155 lbs (70kg) approximately
  • Height: 49 in (125 cm)
  • Depth: 33 in (84 cm)
  • Width: 24.5 in (62 cm)
  • Foam Delivery Rate @ 160 psi: 4.0 lbs (1.8 kg) / minute
  • Foam Delivery Rate @ 200 psi: 5.5 lbs (2.5 kg) / minute
  • Maximum Hose Length: 150 ft (46 m)
  • Power Source: 120V, 15 amp
  • Alternate Power Sources: Pressurized Dry Nitrogen, Compressed Air
  • Foam Type:

The CPDS Series 2 comes with:

  • On board compressor
  • Heater and cover
  • 6' Heavy duty cord
  • On/Off valves for hoses and tanks
  • Toolbox with all necessary tools
  • 4 extra check valves
  • 100' of hose
  • 2 spray guns with 50 nozzles
  • Instructions with a demo DVD

Click here to view all of the CPDS Series 2 Operations Videos

In regards of the Board Feet Kit:


  • Order with the CPDS machine or order separately as a refill product for your existing CDPS machine.
  • From Touch 'N Seal family of insulating and sealing products that set standards
  • Portable, disposable and self-contained 2-part foam system
  • Delivers easy, quick and consistent flow of foam
  • Expands 30 times and dries in less than 1 minute
  • Contains no CFC's or urea formaldehyde


  • Easy to transport
  • No expensive maintenance
  • Low investment cost
  • No deposit/No return

Reduces energy loss by as much as 40%

  • Reduces use of fossil fuels and improves air quality
  • Permanent insulation; does not shrink or settle like cellulose; maintains air seal
  • Compatible with all fiber insulation systems including cellulose, fiberglass and rockwool
  • No ozone depleting chemicals
  • Helps to reduce Green House Gas Emissions
  • Expands to fill smallest to largest gaps, cracks and holes, reducing air exchanges
  • High R-value
  • Closed cell structure
  • Allows for down-sized HVAC systems; uses less energy, fewer cycle times, more consistent “comfort level”, reduces equipment maintenance.
  • Significantly increases structural strength; important in high wind situations (per the Spray Polyurethane Foam Alliance)

Make & Model

  • Manufacturer: Touch 'N Seal
  • Weight: Approx. 108 pounds (not including accessories)
  • Yield: Approx. 750 board feet (62.5 cubic feet)
  • Time: 1 minute
  • R-Value: 7.12 per inch (fire retardant)
  • Density: 1.75 +/- 0.1 per cubic feet
  • Material Safety Data Sheet:
  • Other: Use all contents within 30 days of initial dispensing