Closed Cell Foam Vs. Open Cell Foam: What’s The Difference?

Touch N Seal Foam
Touch N Seal Foam

Applying spray foam insulation to ceilings and walls is one of the best ways to insulate the rooms that act as a passageway for drafts and outside air during extreme weather months; rooms such as the attic and basement. Sealing up the cracks and gaps in these rooms with spray foam insulation helps reduce the amount of energy used to heat and cool the home, as well as the amount of money spent on doing so. Closed cell and open cell Touch N Seal foam are two types of spray foam insulation that can be used for insulating these rooms.

Closed cell Touch N Seal foam gets its name because the foam cells are packed together and closed. The strength and density of this foam allow it to be resistant to water absorption. Additional important details about closed cell foam include:

  • Expansion: up to 30 times when applied at 1” thick
  • Density: 1.75 +/- 0.2 pounds per cubic feet
  • R-Value: 7.12 per inch

In contrast, the cells in open cell foam are not closed completely or packed close together, and this type of foam readily absorbs water. Keep in mind these important details about open cell foam when deciding which type you need:

  • Expansion: 100 times the liquid volume
  • Density: 0.4 to 0.5 pounds per cubic feet
  • R-Value: 3.5 per inch

Closed cell and open cell Touch N Seal foam are different in a number of ways. While open cell foam typically costs less, the strength, density, and higher R-Value of closed cell foam makes it the more advantageous of the two.

Save

Leave a Reply

Your email address will not be published. Required fields are marked *