How to Setup & Use Spray Foam Insulation

* Ensure you follow all safety precautions, including wearing protective eyewear and gloves.

Prepare the Area

• Make sure area to receive foam is clean and dry.
• Ensure your workspace gets adequate ventilation and/or that you wear respiratory gear.
• Make sure ambient and application temperatures are per the instructions.

Set-up the Foam System

Rock the box or tanks to agitate the product thoroughly.

For best results, ensure foam is between 70° F and 90° F before dispensing.

Tear open the top of box along perforated lines, and remove instructions and accessories bag.

Make sure gun is OFF by pushing trigger lock into gun body.

Attach hoses by connecting the red hose to the red cylinder, and the white hose to the white tank.

Insert hoses into carton holes, and tighten hoses with wrench provided.

Close cartons, unlock gun and spray into waste container to ensure chemicals distribute evenly and equally from both hoses.

Lubricate o-ring.

Select spray nozzle.

Align slots on nozzle with notch on gun barrel and push/twist nozzle clockwise to lock in place.

Spray again into waste container to ensure product is mixing properly.

Apply foam as desired.