But the best part of the system is its reach. The user can attach up to 120' of hose to the CPDS 1000. Thats right – 120 Feet. This allows the user to work in a wide range without having to move a set of tanks over and over. No need to carry tanks up into attics or under crawl spaces. Simply locate the CPDS 1000 in a central place, prepare your work area and then spray in a perimeter of over 100.

Another benefit to the CPDS 1000 system is even and complete dispensing of foam. Experienced users of 600 kits know that as the foam is used, pressure in the tanks goes down changing the nature of the foam. Because this system uses an air compressor, the foam components come through the hoses under continuous and consistent pressure. The result is less waste, good quality foam from beginning to end, and consistent spray pressure.

The yield of the tanks in this system is 750 board feet – 25% more product than the 600 kits. Because the propellant is mostly eliminated from the tanks, the manufacturer can put more A and B component in the tanks.

The CPDS 1000 comes with:

• Compressor
• 30' of hose
• 2 spray guns with 50 nozzles
• Tool box with wrenches
• Cleaner
• Instructions with a demo DVD

• Shelf Life 1 year; unopened container
• Output 750 board feet (69.68 m2 @ 25 mm)
• Dry time/Tack Free Time 30 – 60 seconds
• Typical Output – 30' (9 m) Hose: 4.10 lbs/min. (1.86 kg/min.) @160 PSI, 5.5 lbs/min. (2.5 kg/min.) @ 200 PSI
• Fully Cured Approximately 1 hour
• Cuttable 2 – 5 minutes
• ASTM G21 Fungi Resistance Does not support growth
• ASTM E84 Surface Burning Characteristics @ 2” (51 mm): Flame Spread: 15, Smoke Development: 250
• ASTM E96 Water Vapor Transmission: 2.80 perms@ 1 in. (25 mm)
• ASTM E 283 Air Permeance: < 0.01 ft3/sec/ft2 (< 0.05 L/s/m2)
• ASTM C518 R-Value - Initial: 7.12/in. (25mm), Aged (28 days): 6.40 / in. (25 mm)
• ASTM D1621 Compressive Strength: 13.1 psi (0.92 kgf /cm2)
• ASTM D1622 Density: 1.75 ± .10 pcf (28.03 ± 1.60 kg/m3)
• ASTM D1623 Tensile Strength: 38.23 psi (2.69 kgf/cm2)
• ASTM D2126 Thermal and Humid Aging – Dimensional Stability: -40°F (-40ºC) 2 weeks (Linear: +0.05%, Mass: +0.10%) / 158°F (70ºC) 2 weeks (Linear: +1.90%, Mass: -2.95%) / Combined -40°F (-40ºC) 2 weeks & 158°F (70ºC) 2 weeks (Linear: +1.85%, Mass: -2.85%)
• ASTM D6226 Closed Cell Content: > 90%
• International Residential Code: Compliant
• California Bureau of Home Furnishings and Insulation: Filed

Additional Information (CPDS 1000): Specification Sheet (pdf)