Highlights 30% tax credit (up to $1,500) by adding insulation to your home! From Touch 'N Seal family of insulating and sealing products that set standards Portable, disposable and self-contained 2-part foam system Includes upside down dispensing, applicator, and flexible 15 ft hoses Delivers easy, quick and consistent flow of foam Expands 30 times and dries in less than 1 minute Contains no CFC's or urea formaldehyde

How It Works

When the Touch 'N Seal Foam mix is sprayed onto your walls, floors and ceilings, the shell of your home becomes protected. It's this protection that blocks heat gain in the summer and heat loss in the winter, thus preventing dramatic temperatures changes in the home. Correctly installed, insulation delivers comfort and lower energy bills during the hottest and coldest times of the year. In fact, if you seal air leaks with caulk before you insulate, you can save up to 20% on your heating and cooling*, as insulation works best when air is not moving through or around it.

Package Content**

• 2-Component Polyurethane Foam
• Applicator
• 15 ft Hoses
• Instructions (English, Spanish, French)

• Manufacturer: Touch 'N Seal
• Weight: 42 lbs
• Yield: Approx. 15 board feet (1.25 cubic feet)
• Time: 1 minute
• R-Value: 5.5 per inch
• Density: 1.75 +/- 0.2 per cubic feet
• Material Safety Data Sheet: Component "A" and Component "B"
• Technical Sheets:
  • Foam Specifications
  • Temperatures, Times & Yields
• Other: Use all contents within 24 hours of initial dispensing

How to Setup & Use

* For safety, it is recommended you wear gloves, goggles, and a mask when handling or using this product.

• Tear open the back of the box.
• Without forcing, remove hoses and applicator to full length.
• Ensure gun safety is ON (roller is locked toward end of applicator).
• Pull yellow tab to remove black plastic valve lock, and discard.
• Activate valves by pulling black strap up and insert strap into slit (marked in yellow) on back of box (hoses will partially fill with chemicals).
• Hold unit upside down, move roller to ON position (towards hoses) and dispense foam.
• Adjust roller to increase or decrease flow as desired.
• If dispensing is stopped for more than 30 seconds, replace nozzle with the extra provided.
• Foam can be trimmed, painted, sanded or plastered after curing completely.

• Caulk Before Foam: Remember, caulk air leaks before you insulate for maximum effects on weatherizing your home!
• Need a Bigger Kit? Touch 'N Seal Foam Kits, standard and fire-retardant formulas, are also available in amounts:
  • Foam Kit 200 (200 board ft or 16.6 cubic ft)
  • Foam Kit 600 (600 board ft or 50 cubic ft)

• Watch Video: How to Assemble & Use Foam Kit by Touch 'N Seal
• Read Help: Foam Kit Troubleshooting Guide by Touch 'N Seal
• Working with 2 part foam in cooler temperatures

Helpful Tools

• Visit our Learning Center to read more tips and guides on sealing, insulating, weatherizing, etc.
• Also visit Energy Star to read home improvement tips and guides such as:
• Recommended Levels of Insulation
• Areas That Commonly Leak Air