The Kidde 0910 is a 10-year, sealed battery, ionization, smoke alarm
with Alarm Memory and Smart HushTM feature. The innovative design
of this alarms automatic activation is unlike any other smoke alarm.
The 0910 alarm will automatically activate when it is attached to the
mounting bracket; there are no pull-tabs, no switches, everything is
automatic. At the end of the alarm life, the unit will chirp, indicating
the alarm is in need of replacement. The customer can use a simple
tool such as a screwdriver to deactivate the unit, stopping the low
battery chirp and making it safe for disposal.
The sealed-in board-mounted batteries will power the 0910 unit
for its complete 10-year life. No replacement batteries will ever be
needed.
This alarm uses ionization sensing technology. Ionization sensing
alarms may detect invisible fire particles (associated with flaming
fires) sooner than photoelectric alarms. Photoelectric sensing alarms
may detect visible particles (associated with smoldering fires) sooner
than ionization alarms.
Kidde strongly recommends that both ionization and
photoelectric smoke alarms be installed to help insure
maximum detection of the various types of fire that can
occur within the home
The Kidde 0910 sealed battery operated smoke alarm
features a self-activation mechanism making installation simple and
easy. It also features Smart HushTM Control allowing consumers to
temporarily silence nuisance alarms and an End of Life Alert indicating
it is time to replace the alarm.
At the end of the alarms 10-year life, deactivation of the alarm is
just as easy. Using a tool such as a small screwdriver, a deactivation
switch removes power from the alarm and renders the batteries safe
for disposal. The alarm lockout feature mechanically prevents a deactivated
unit from being mounted back on the mounting bracket.
- Sealed-In Lithium Battery – Sealed-in lithium power
supply; no battery replacement required over the 10
year life of the alarm. Eliminates worry about battery
removal or unauthorized deactivation of alarm.
- Self Activation – Alarm automatically activates when
attached to the mounting bracket.
- Alarm Memory – Rapidly flashing LED alerts user if the
alarm has sounded since the last time the test/reset
button was used.
- Smart HushTM – Will temporarily silence nuisance
alarms and will not allow hush mode to be activated
unless the unit is in alarm mode.
- Test/Reset Button – Tests units circuit operation and
resets memory after an alarm condition occurs.
- End of Life Warning – Alarm chirps every 30-45
seconds indicating the alarm is in need of replacement.
- Tamper Resist – (when activated upon installation)
effective in preventing someone from removing the unit
from the mounting bracket.
- LED – A flashing red indicator light
with four modes of operation:
standby, alarm mode,
hush mode, and memory set.
|
