| Fantech Inline fans don't have sone ratings (a measure of loudness), but that doesn't mean you'll hear them. This fan consists of four components. Two small grill housings with integrated 14 watt compact fluorescent lights that are installed at the ceiling, one fan that is installed in a remote location well away from the bathroom, and a "Y" adapter to allow both exhaust grills to share the one fan. Because the fan is not right at the ceiling, the motor noise won't be as loud, and the penetration through the ceiling will be smaller than with a conventional bathroom exhaust fan.
This fan should be installed with at least 8 feet of insulated flex duct between the grill/light and the fan. Flex duct will not only help reduce the transmission of sound from the remote fan back to the bathroom, but it is often easier to install than rigid duct.
This model has a 230 cfm fan, comes with two 6 inch square grill/light housings with dampers, one 4x4x6 "Y" duct, and is designed for use with 4 inch flex duct between the grills and the fan and 6 inch duct between the fan and the outside exhaust vent. It is rated for use in wet locations.
- Electrical Specifications: 120 volts AC, 60 Hz, 71 watts
- Maximum Airflow: 230 cfm (for bathrooms up to 8840 cu. ft.)
- Grill Size: 7 inch diameter
- Grill Housing: 5.25 inches deep x 6 inches square
- Approvals: UL, CUL, HVI
- Manufacturer Warranty: 5 years
Additional Information: Fantech Bath Ventilation Solutions Product Brochure (pdf) |
