| Approximately 1 in 5 toilets in the United States are leaking, with leaks often the underlying cause of high water bills. The LeakAlertor is a leak detection device that adheres to the side of the toilet tanks and notifies you visually and audibly when the flapper has begun to leak. The LeakAlertor works by isolating the vibration signature of a fill valve action and qualifying it as either a normal flush cycle or a refill action in response to a leaking flapper.
On the face of the device are three LEDs. The LeakAlertor flashes GREEN when the unit is functioning properly and no leak is detected. It will flash RED and beep if a leak has been detected. When the LeakAlertor flashes YELLOW it is time to exchange the device for a replacement containing the most up-to-date software, new enclosure, and new battery. The typical life of the LeakAlertor is 15 to 24 months, with a replacement LeakAlertor costing $4.95 through the manufacturer's replacement program.
To install...
Peel off the protective backing.
Press the unit onto the outside surface of the tank.
After attaching the unit to the tank, remove the battery activation tab. The green lamp will flash and you will hear three beeps.
When the red lamp turns on, flush the toilet.
... and you're done.
- Dimensions: 2" x 3"
- Manufacturer Warranty: 90 Days
- Origin: United States
Additional Information: LeakAlertor Replacement Program |