Accessories

This adapter converts older existing 3/8 in. shower arms to a standard 1/2 in. size. It is ideal for retrofitting a standard 1/2 in. showerhead without replacing the shower arm.

This is a standard chrome-plated solid brass replacement shower arm. It is 6 inches long with 1/2 inch outside threads on both ends.

AM Conservation's calibrated Shower Flow Meter Bag makes it easy to measure the flow rate of water from installed showerheads and faucets, which in turn can help you estimate the savings to be realized by upgrading to newer water-saving devices.

Converts female-threaded shower arms to standard 1/2” male threading. Allows the installation of a standard 1/2” showerhead without replacing the shower arm.

Evolve's ShowerStart Ladybug showerhead adapter is inserted between the showerarm and your existing showerhead. When the shower is initially turned on the device monitors the water temperature. When the water temperature reaches bathing temperature, the device stops the flow to a trickle.

The WaterWatch Water Meter has an eight-pattern sprayer with built-in meter to save water and money!

Insulating domestic hot water pipes is one of the easest and most cost effective measures you can do. The payback is well within one year. This a 1/2 inch pipe insulation

Insulating domestic hot water pipes is one of the easest and most cost effective measures you can do. The payback is well within one year. This is a 3/4 inch pipe insulation

Adding an extra layer of insulation to hot water storage tank can help to reduce these standby losses by 25% or more, and water heating costs by 4% or more. This water heater blanket is suitable for heaters with capacity of 60 gallons. This blanket has an R-value of 5.0.

Adding an extra layer of insulation to your hot water heater tank can help to reduce these standby losses by 25% or more, and water heating costs by 4% or more. This water heater blanket is suitable for water heaters with capacity of 60 gallons. This blanket has an R-value of 6.7.

This is more than enough for a one or two showerhead installation. Wrap a bit of this white teflon tape around your showerarm threads before installing a showerhead and you'll reduce the likelihood of a leak through the threads where the showerhead screws onto the showerarm.

This adapter will convert specific older style ball-type showerarms to accept a conventional threaded water-saving showerhead.